|
We have made an amendment to the Junior Banger rules in terms of bumpers permitted. Please would all parents / drivers note the following:
Front & Rear Bumpers
Original bumpers may remain, but plastic bumpers must be removed. The original metal fixing behind the plastic bumper can remain and must be bolted, not welded. If there is no metal piece behind the plastic bumper on the front, then a replacement front bumper may be fabricated. The fabricated front bumper must be a maximum of 75mm x 3mm thick, and may be folded up the side of the chassis rails by a maximum of 3” with a maximum of 2 bolts on each side – no welding. The bolts must go through the chassis, not up the chassis. NO replacement bumper is permitted on the back of the car. No tow bar must be left on the car.
|
